PRODUCT DETAILS
UV DTF TRANSFER
Libbey cups, coffee mugs etc. Printed approximately 5cm in diameter. No edits can be made. You will receive approx 60 labels with half being white and the other half being black.
- Premium UV DTF Transfers
- Waterproof & Permanent
- No weeding
- No layering
- Receive ready to peel n stick
Please note: while the transfers are waterproof, I recommend that you do not run the print through the dishwasher once the decal is applied. Hand wash ONLY and DO NOT SOAK!
DO NOT TRY THE SCRATCH PROOF TEST FOR A MINIMUM OF 24 HOURS AFTER APPLYING
How to apply
1. Peel transfer off the backing sheet
2. Place the transfer on the cup (make sure the design is straight and positioned correctly).
3. Press the transfer down, pushing out any air bubbles(if you can't push all the air bubbles out, use a pin to put a tiny pin prick than push the air bubbles out)
4. Rub all over the design with your fingers or silicone squeegee. If the image has small fine details, apply the transfer and let sit before peeling to allow time for the adhesive to bond. If the fine details are not sticky, use the hair dryer hack or prize the design from the backing sheet to the substrate gently. Once you have started the peel the rest should peel.
5. Peel clear film off against it's self (please do not rip the transfer tape off. Be patient and do it slowly to ensure the transfer is applied properly).
The adhesive is extremely strong!!! Once the transfer touches the substrate it's almost impossible to remove. Please be careful when apply.
NO HEAT PRESS REQUIRED - SIMPLY PEEL AND TRANSFER!
PEN WRAPS