UV DTF WRAP

Suitable for 16oz libbey glass cans - printed 9.6 inch x 4.5 inch

Premium UV DTF Transfers
Waterproof & Permanent
No weeding
No layering
Receive ready to peel n stick

Please note: while the transfers are waterproof, I recommend that you do not run the libbey glass through the dishwasher once the wrap is applied. Hand wash ONLY!

How to apply
1. Peel transfer off the backing sheet
2. Place the transfer on the cup (make sure the design is straight and positioned correctly).
3. Press the transfer down, pushing out any air bubbles(if you can't push all the air bubbles out, use a pin to put a tiny pin prick than push the air bubbles out)
4. Rub all over the design with your fingers or silicone squeezgy.
5. Peel clear film off against it's self (please do not rip the transfer tape off. Be patient and do it slowly to ensure the transfer is applied properly).

The adhesive is extremely strong!!! Once the transfer touches the substrate it's almost impossible to remove. Please be careful when apply.

NO HEAT PRESS REQUIRED - SIMPLY PEEL AND TRANSFER!

* DISCOUNT FOR BULK WRAPS WILL BE APPLIED AT THE CHECKOUT

LIBBEY CAN/CUP UV DTF WRAPS - 16oz